Call Rtr_Close_Channel; Parameters For Rtr_Close_Channel - Compaq AA-Q88CE-TE System Manager's Manual

CALL RTR_CLOSE_CHANNEL

CALL RTR_CLOSE_CHANNEL
The CALL RTR_CLOSE_CHANNEL command causes a command server to
execute the
Format
CALL RTR_CLOSE_CHANNEL
Command Qualifiers
/CHANNEL_NAME=channel-name
/CLUSTER
/IMMEDIATE
/NODE[=node-list]
/OUTPUT[=file-spec]
Description
The CALL RTR_CLOSE_CHANNEL command causes a command server to call
the rtr_close_channel( )
The numeric status returned from the call is then converted to its textual
representation and displayed.
The rtr_close_channel( )
Programmer's Reference Manual.
The prototype of
rtr_status_t
Table 6–4 shows the correspondence between values you supply on the command
line and the C language parameter values produced and used for the call.
Table 6–4 Parameters for rtr_close_channel
C Parameter Name C Parameter Value
channel
flags RTR_NO_FLAGS
Qualifiers
/CHANNEL_NAME=channel_name
/CHANNEL_NAME=RTR$DEFAULT_CHANNEL
Specifies the channel for which the operation is to be performed.
The command server uses a combination of the channel_name and the window
from which the call was issued to uniquely identify which channel to use.
channel_name
The default channel name is RTR$DEFAULT_CHANNEL.
You may close all the channels belonging to a window using
CLOSE CHANNEL/CHANNEL_NAME=*.
6–10 RTR Command Line Interface
rtr_close_channel( ) routine and to display the returned status.
Defaults
/CHANNEL_NAME=RTR$DEFAULT_CHANNEL
/NOCLUSTER
/IMMEDIATE=RTR$DEFAULT_CHANNEL
/NODE=default-node-list
/OUTPUT=stdout
routine using values supplied on the command line.
routine itself is described in Application
rtr_close_channel( )
rtr_close_channel (
rtr_channel_t
rtr_clo_flag_t
) ;
is not case sensitive.
is:
channel,
flags
Command Line Specification
/CHANNEL_NAME=name
[none] [D]