Recall - Compaq AA-Q88CE-TE System Manager's Manual

RECALL

RECALL
Display a previously entered command for subsequent command editing.
Format
RECALL [command-specifier]
Command Qualifiers
/ALL
Description
When you enter commands to the RTR Utility, they are stored in a recall buffer
for later use with the
entering the first few characters of the command or the command's number. The
RECALL/ALL
When you recall a command, the RTR Utility displays the command but does not
execute it. If you want to execute the command as it appears, press RETURN.
You can also use the command editing facility to make changes in the command
line and then press RETURN to process the revised version of the command.
Parameters
command-specifier
Specifies
you want to recall.
If
command-specifier
recalled.
Qualifiers
/ALL
/NOALL (D)
Displays all the commands (and their numbers) available for recall.
Examples
RTR> CREATE FACILITY QUOTES/FRONT=FE3/ROUTER=TR2
RTR> SHOW FACILITY/LINK
RTR> RECALL CREATE
RTR> CREATE FACILITY QUOTES/FRONT=FE3/ROUTER=TR2
RTR> CREATE FACILITY ORDERS/FRONT=FE3/ROUTER=TR2
Create facility "QUOTES"
1
Check the links
2
Recall the
3
Change the facility name to "ORDERS" and resubmit the command.
4
6–104 RTR Command Line Interface
command. Commands can be recalled by either
RECALL
command can be used to list the last twenty commands.
either the command number
is omitted then the most recently entered command is
2
3
CREATE FACILITY command
Defaults
/NOALL
or the first few characters of the command
1
4
5