Delete Facility - Compaq AA-Q88CE-TE System Manager's Manual

DELETE FACILITY

Delete an RTR facility.
Format
DELETE FACILITY
Command Qualifiers
/CLUSTER
/NODE=node-list
/OUTPUT[=file-spec]
Description
The DELETE FACILITY
the command is issued. After issuing this command applications are able to use
the facility. Any outstanding transactions using the facility are aborted.
Parameters
facility_name
The name of the facility to delete.
The parameter
Qualifiers
/CLUSTER
/NOCLUSTER (D)
Specifies that the command is executed on all the nodes in the cluster.
If neither
nodes specified by the latest
command has been entered then the command is executed only on the node where
the command was issued.
Note: In environments that do not support clustering, use of the /CLUSTER
qualifier will cause the relevant command to be executed on the local node only.
/NODE[=node-list]
/NODE=default-node-list (D)
Specifies that the command is executed on all nodes specified in
node-list
command was issued.
/OUTPUT[=file-spec]
/OUTPUT=stdout (D)
Specifies that the resulting information is written to the file
/OUTPUT
facility_name
command removes the specified facility on the node where
must be supplied.
facility_name
nor is specified then the command is executed on the
/NODE /CLUSTER
SET ENVIRONMENT
is omitted then the command is executed only on the node where the
or is omitted then the standard or default output is used.
file-spec
Defaults
/NOCLUSTER
/NODE=default-node-list
/OUTPUT=stdout
command. If no
RTR Command Line Interface 6–61
DELETE FACILITY
SET ENVIRONMENT
node-list . If
file-spec . If