Show Key - Compaq AA-Q88CE-TE System Manager's Manual

SHOW KEY

SHOW KEY
Display the key definitions created by the
Format
SHOW KEY [key-name]
Command Qualifiers
/ALL
/FULL
/OUTPUT[=file-spec]
/IF_STATE
Description
The SHOW KEY
command.
Parameters
key-name
Specifies the name of the key whose definition you want displayed. See the
description of the
Qualifiers
/ALL
/NOALL (D)
Requests that all key definitions in the current state be displayed. You can use
the /IF_STATE qualifier to request key definitions in other states. Do not specify
a key name with the /ALL qualifier. If no state is specified, all key definitions in
the current state are displayed.
/FULL
/NOFULL (D)
Requests that all qualifiers associated with a definition are displayed. By default,
only the state of the definition and the definition itself are displayed.
/OUTPUT[=file-spec]
/OUTPUT=stdout (D)
Specifies that the resulting information is written to the file
/OUTPUT
/IF_STATE=state-name
/NOIF_STATE (D)
Specifies the name of a state for which the specified key definitions are displayed.
State names can be any appropriate alphanumeric string. State names are
created with the
use
/NOIF_STATE
6–142 RTR Command Line Interface
command shows the key definitions created by the DEFINE /KEY
command for a list of the valid key names.
DEFINE /KEY
or is omitted then the standard or default output is used.
file-spec
command. If you omit the
DEFINE /KEY
, key definitions in the current state are displayed.
command.
DEFINE /KEY
Defaults
/NOALL
/NOFULL
/OUTPUT=stdout
/NOIF_STATE
file-spec . If
qualifier or
/IF_STATE