Aligned with
fan bracket
card guide
FIGURE 8-17
8.4.4
Replacing the Graphics Card
Caution – Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an antistatic mat. Store ESD-sensitive components in
antistatic bags before placing them on any surface.
1. Position the graphics card in the chassis (
2. Guide the card bracket tab into the chassis back-panel slot opening. Next, guide
the opposite end of the card into the fan bracket card guide so that the card is
aligned evenly with the motherboard connector.
8-26
Sun Blade 1000 and Sun Blade 2000 Service Manual • January 2002
Screw
Removing and Replacing a Graphics Card
Bracket tab
Graphics
card
).
FIGURE 8-17