Sun Microsystems Sun Blade 1000 Service Manual page 36

How This Book Is Organized
This document is organized into chapters and appendixes as follows. A glossary and
index are included.
Chapter 1 describes the major hardware components used in the workstations.
Chapter 2 describes the execution of individual tests to verify hardware
configuration and functionality using SunVTS™.
Chapter 3 describes the execution of the Power On Self Test (POST) and provides
examples of POST output patterns.
Chapter 4 provides troubleshooting information and suggested corrective actions for
hardware problems.
Chapter 5 explains how to prepare for removal and replacement of workstation
components.
Chapter 6 provides step-by-step procedures for removing and replacing major
subassemblies.
Chapter 7 provides step-by-step procedures for removing and replacing workstation
storage devices.
Chapter 8 provides step-by-step procedures for removing and replacing the
motherboard and various components associated with the motherboard.
Chapter 9 describes the tasks you must do after you finish removing and replacing
internal workstation components. This chapter also explains how to externally
control standby operation.
Chapter 10 explains the OpenBoot™ Emergency Procedures for standard (non-USB)
keyboards and for USB type keyboards.
Appendix A provides product, physical, electrical, Energy Star compliance, and
®
environmental specifications for the workstations.
Appendix B provides signal descriptions and connector pin assignments.
Appendix C provides a functional description of the major component systems
within the Sun Blade 1000 and Sun Blade 2000 workstations.
Appendix D describes the interaction of the USB mouse, USB keyboard, and USB
power management with the Sun Blade 1000 and Sun Blade 2000 workstations.
xxxvi Sun Blade 1000 and Sun Blade 2000 Service Manual • January 2002