Sun Microsystems Sun Blade 1000 Service Manual page 25

Compliance Model Number:
Product Family Name:
EMC
USA—FCC Class B
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This equipment may not cause harmful interference.
2. This equipment must accept any interference that may cause undesired operation.
European Union
This equipment complies with the following requirements of the EMC Directive 89/336/EEC:
EN55022:1998/CISPR22:1997
EN55024:1998 Required Limits (as applicable):
EN61000-3-2:1995 + A1, A2, A14
EN61000-3-3:1995
Safety
This equipment complies with the following requirements of the Low Voltage Directive 73/23/EEC:
EC Type Examination Certificates:
EN60950:1992, 2nd Edition, Amendments 1, 2, 3, 4, 11
IEC 950:1991, 2nd Edition, Amendments 1, 2, 3, 4
Evaluated to all CB Countries
Supplementary Information
This product was tested and complies with all the requirements for the CE Mark.
/S/
Dennis P. Symanski
Manager, Compliance Engineering
Sun Microsystems, Inc.
901 San Antonio Road, MPK15-102
Palo Alto, CA 94303-4900 U.S.A.
Tel: 650-786-3255
Fax: 650-786-3723
Declaration of Conformity
180
Sun Blade 1000 and Sun Blade 2000
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
EN61000-4-11
DATE
Class B
4 kV (Direct), 8 kV (Air)
3 V/m
1 kV AC Power Lines, 0.5 kV Signal and DC Power Lines
1 kV AC Line-Line and Outdoor Signal Lines
2 kV AC Line-Gnd, 0.5 kV DC Power Lines
3 V
1 A/m
Pass
Pass
Pass
TÜV Rheinland Certificate No. S 9872459
CB Scheme Certificate No. US/3009/UL
/S/
Peter Arkless
Quality Manager
Sun Microsystems Scotland, Limited
Springfield, Linlithgow
West Lothian, EH49 7LR
Scotland, United Kingdom
Tel: 0506-670000 Fax: 0506-760011
DATE
xxv