Sun Microsystems Sun Blade 1000 Service Manual page 136

i. Press and release the front panel power switch (
ii. From the menu displayed on the workstation monitor, select Shutdown.
b. If the Solaris OS is not running in a windowing environment:
i. Press the front panel power switch (
c. If the workstation is at the ok prompt (OpenBoot interface) press and hold the
front panel power switch for four seconds (see
workstation.
This action forces an immediate power off of the workstation.
Caution – Pressing the power switch does not remove all power from the
workstation; a trickle current remains in the power supply. To remove all power
from the workstation, disconnect the power cord.
FIGURE 5-1
5-6 Sun Blade 1000 and Sun Blade 2000 Service Manual • January 2002
shut down all programs, the Solaris operating environment, and to power off
the workstation.
This action allows automatic shutdown of all programs, the Solaris operating
environment and to power off the workstation.
Workstation Power Switch
FIGURE 5-1
) to power off the workstation.
FIGURE 5-1
FIGURE 5-1
Power switch
Sun logo
Front panel
) to automatically
) to power off the