The FC-AL host controller ASIC has a 64-bit, 66 MHz PCI (EPCI) interface. The
controller contains the serializer/deserializer (SERDES) and the transceivers on-chip.
The host controller implements the Fibre Channel protocol through a microcoded
engine. The memory for the firmware is external and is implemented with
synchronous 128 Kilobyte SRAM. This memory also keeps the context data for
outstanding I/Os.
The figure below shows the Sun Blade 1000 and Sun Blade 2000 disk subsystem
architecture:
ISP2200A
FIGURE C-13
C-40
Sun Blade 1000 and Sun Blade 2000 Service Manual • January 2002
EPCI
PCI interface
Mem
Tx
ctl
IO
proc
2
NC
0
HDMP0451
Sun Blade 1000 and Sun Blade 2000
Rx
Fibre engine
SERDES
4
3
Connector
FC-AL Disk Subsystem