Pci Modules; Figure 7-1 Pci Card Carrier - Sun Microsystems Netra ft 1800 Hardware Reference Manual

7
C H A P T E R

PCI Modules

Standard PCI cards can be used in a Netra ft 1800 system when they are included in
a PCI module. Supported cards are shown in . The PCI module consists of
TABLE 7-1
the card and a PCI carrier which has the standard features of a module.
The PCI carrier accommodates both short and long industry-standard PCI format
interface cards, utilizing the ISA style I/O panel. I/O cabling access is via the front
panel of this module. The module has an ejection system with an interlock switch as
described in Section 1.4.4 "Module Injection Mechanisms" on page 1-6. The front
panel contains indicators as described in Section 1.4 "Common Features of Modules"
on page 1-4. The PCI carrier modules have no internal forced-air cooling, relying on
the CAF module.
The overall dimensions of a PCI module are 142 mm (w) x 390 mm (d) x 34 mm (h)
(5.5 inches x 14.6 inches x 1.34 inches).
PCI Card Carrier
FIGURE 7-1
7-1