Mounting A Qfx10002 In A Rack; Table 46: Inventory Of Components Supplied With A Qfx10002 - Juniper QFX10002 Hardware Manual

QFX10002 Switch Hardware Guide

Table 46: Inventory of Components Supplied with a QFX10002

Component
Chassis with three fan modules and two power supplies (QFX10002-36Q) or four power supplies
(QFX10002-60C or QFX10002-72Q).
Rack mount kit
Rear mounting blades
Front mounting brackets
4x6 mm flathead screws
RJ-45 cable and RJ-45 to DB-9 adapter
Documentation roadmap card
Warranty
See Also

Mounting a QFX10002 in a Rack

92
Two power supplies for QFX10002-36Q and four power supplies for QFX10002-60C
and QFX10002-72Q
Three fan modules
Save the shipping carton and packing materials in case you need to move or ship the
7.
switch later.
QFX10002 Installation Overview on page 89
You can mount QFX10002 models on a four post 19-in. rack using the mounting kit
provided with the switch.
For four post rack installation, the mounting kit contains two front mounting rails with
two matching rear mounting blades. This configuration allows either end of the switch
to be mounted flush with the rack and still be adjustable for racks with different depths.
The front and rear rack rails must be spaced between 28 in. (71.1 cm) and 36 in. (91.4 cm)
front to back.
This topic describes:
Before You Begin Rack Installation on page 93
Four Post Procedure on page 94
Quantity
1
1
2
2
24
1
1
1
Copyright © 2019, Juniper Networks, Inc.