Setting The Channel (Ds); Setting The Translation Mode - Nortel BayStack 660 Use Manual

Setting the Channel (DS)

This sets the Channel (DS) for the access point. "DS" refers to Direct Sequence.
To enable the Channel (DS):
Choose Configure > Group.
1.
Select the group you want to configure.
2.
The Multiple Configuration Wizard dialog box
Click Channel (DS).
3.
Click Next.
4.
The Channel (DS) dialog box opens.
Enter a value between 1 and 11.
5.
Click Next.
6.
A confirmation dialog box opens.
Click Finish if the information is correct.
7.
The Configuration Completion dialog box opens
the changes are being processed.
Click OK when the process is complete.
8.

Setting the Translation Mode

To set the Translation Mode for the access point:
Choose Configure > Group.
1.
Select the group you want to configure.
2.
Click Translation Mode.
3.
Click Next.
4.
The Translation Mode dialog box opens asking you to select either:
•
•
Select the translation mode.
5.
203939-B
802.1h+NTISTT (default)
Straight encapsulation
Installing and Starting the AP Manager
(Figure 4-15) opens.
(Figure 4-16) showing that
4-35