Click Finish.
7.
The Configuration Completion dialog box opens
the changes are being processed.
Figure 4-16.
Click OK when the process is complete.
8.
Changing the Subnet Mask and Gateway
To change either the subnet mask or gateway address for the access point:
Choose Configure > Group.
1.
Select the group you want to configure.
2.
The Multiple Configuration Wizard dialog box
Click Subnet Mask and/or Gateway.
3.
Click Next.
4.
The Subnet or Gateway dialog box opens.
Enter the new address.
5.
203939-B
Configuration Completion Dialog Box
Installing and Starting the AP Manager
(Figure
4-16) showing that
(Figure
4-15) opens.
4-31