Table 4-4. Advanced Tab Items - Nortel BayStack 660 Use Manual

Using the BayStack 660 Wireless LAN Access Point
Table 4-4
Table 4-4.
Item
Dwell Time
Hop Sequence
DS Option
(Direct Sequence)
BSS Rates (Mbps)
Translation
Expert
PHY Type
Regulatory Domain
4-12
describes the items in the Advanced tab.
Advanced Tab Items
Description
The dwell time is the length of time a radio uses before it "hops" to
another frequency. Choose a time between 1 and 390 (TUs).
With frequency hopping, a radio transmits and receives on one
frequency for a short period of time and then pseudo-randomly
moves to another frequency every dwell time. This technology
reduces susceptibility to interference from other transmitters and
noise sources in the same 2.4 GHz range since transmission is
constantly shifting from one frequency to the next. Check the
Auto-negotiation parameter or set the Pattern to select the
desired hop sequence.
(Not applicable for the BayStack 660).
Select the BSS Rate supported by the access point: Supported
(2.0) or Basic (1).
Select the Translation mode for the device: 802.1h+NTI STT
(default) or Straight Encapsulation from the menu.
Opens the Expert dialog box. Go to
page 4-13 for instructions on setting the expert parameters. A
warning message is displayed before the dialog box opens. Read
the message and click Yes to continue.
Displays the PHY type: either DS (BayStack 660 Access Point) or
FH (BayStack 650 Access Point).
Displays which country that the Access point resides in.
"Using the Expert Setting" on
203939-B