Enabling The Authorized Station List - Nortel BayStack 660 Use Manual

Using the BayStack 660 Wireless LAN Access Point
•
•
Click Next.
5.
A confirmation dialog box opens.
Click Finish if the information is correct.
6.
The Configuration Completion dialog box opens
the changes are being processed.
Click OK when the process is complete.
7.

Enabling the Authorized Station List

This option enables the authorized station list.
To enable or disable the authorized station list:
Choose Configure > Group.
1.
Select the group you want to configure.
2.
The Multiple Configuration Wizard dialog box
Click Enable Authorized Station List.
3.
Click Next.
4.
The Enable Authorized Station List dialog box opens.
Check the Enable Authorized Station List check box to enable (default),
5.
or deselect to disable.
Click Next.
6.
A confirmation dialog box opens.
Click Finish if the information is correct.
7.
The Configuration Completion dialog box opens
the changes are being processed.
Click OK when the process is complete.
8.
4-38
Remove— Removes a single file from the list.
Remove All— Removes all files.
(Figure 4-16) showing that
(Figure 4-15) opens.
(Figure 4-16) showing that
203939-B