Setting The Channel (Ds); Setting The Translation Mode - Nortel BayStack 650 User Manual

Using the BayStack 650 Wireless LAN Access Point

Setting the Channel (DS)

This sets the Channel (DS) for the access point. "DS" refers to Direct Sequence.
To enable the Channel (DS):
Choose Configure > Group.
1.
Select the group you want to configure.
2.
The Multiple Configuration Wizard dialog box
Click Channel (DS).
3.
Click Next.
4.
The Channel (DS) dialog box opens.
Enter a value between 1 and 11.
5.
Click Next.
6.
A confirmation dialog box opens.
Click Finish if the information is correct.
7.
The Configuration Completion dialog box opens
the changes are being processed.
Click OK when the process is complete.
8.

Setting the Translation Mode

To set the Translation Mode for the access point:
Choose Configure > Group.
1.
Select the group you want to configure.
2.
Click Translation Mode.
3.
Click Next.
4.
The Translation Mode dialog box opens asking you to select either:
•
•
Select the translation mode.
5.
Click Next.
6.
A confirmation dialog box opens.
Click Finish if the information is correct.
7.
The Configuration Completion dialog box opens
Click OK when the process is complete.
8.
4-36
802.1h+NTISTT (default)
Straight encapsulation
(Figure 4-15) opens.
(Figure 4-16) showing that
(Figure 4-16).
203282-B