Nortel BayStack 660 Use Manual page 26

Using the BayStack 660 Wireless LAN Access Point
Avoid overlapping access points with channels separated by less than five
channels in order to maximize the performance of your network.
Figure 1-1.
For a smaller building, it is more appropriate to overlap three BayStack 660
Access Points set to different channels to maximize use of the RF spectrum and
system throughput. The access points should be separated by at least 10 feet
(3 meters) to avoid potential interference. However, one BayStack 660 Access
Point is sufficient if the network is not very busy.
1-4
CH1 CH6
CH6 CH11 CH1
CH1 CH6
CH11 CH1
CH6 CH11
CH11 CH1
CH1 CH6
Cell Planning for the BayStack 660 LAN Products
CH11 CH1 CH6
CH6 CH11
CH11 CH1 CH6
CH6 CH11
CH1
CH6 CH11 CH1
CH11 CH1 CH6
CH11
CH1 CH6
CH11
CH11
8695EA
203939-B