Fail-Over Commands; Figure 6-6. Encapsulation Commands Example - Nortel BayStack 660 Use Manual
Wireless lan access point
Hide thumbs
Also See for BayStack 660:
- User manual (94 pages) ,
- Release note (12 pages) ,
- Reference manual (8 pages)
Table of Contents
Advertisement
Using the BayStack 660 Wireless LAN Access Point
Figure 6-6
Figure 6-6.
Fail-Over Commands
The fail-over commands enable you to configure and to display fail-over
attributes.
The fail-over commands are:
•
fov ether-link-detect— enables or disables Ethernet link detection
•
fov infrstr-ping— enables or disables infrastructure pinging
•
fov ping-target-addr— sets ping target station address
•
fov show— displays fail-over attributes
6-12
shows an example of the encapsulation commands.
Encapsulation Commands Example
203939-B
Advertisement
Table of Contents
Troubleshooting
