Configuration Commands; Encapsulation Commands - Nortel BayStack 660 Use Manual

Configuration Commands

The configuration commands enable you to restore factory default configuration
and to save current configuration to flash.
The configuration commands are:
• config reset– restore factory default configuration
• config save— save current configuration to flash

Encapsulation Commands

The encapsulation commands enable you to configure and to display
encapsulation attributes.
The encapsulation commands are:
• encap scheme— select encapsulation scheme
• encap show— displays authentication attributes
The syntax for the encapsulation commands is:
encap scheme {straight | 802.1h+NTISTT}
encap show
203939-B
Command Line Interface
6-11