Viewing A Group; Table 4-8. Groups Dialog Box Status Symbols - Nortel BayStack 660 Use Manual

Using the BayStack 660 Wireless LAN Access Point
Table 4-8
Table 4-8.
Symbol
-
*
!
Q
Click the access points that you want to add to the new group.
6.
A group should contain more than one access point.
Click Finish.
7.
The Groups dialog box opens again
displays the group has been added.

Viewing a Group

To view a group:
Choose Edit > Groups.
1.
The Groups dialog box opens
Click the group you want to view.
2.
Click View.
3.
The Groups dialog box opens, showing the AP Name, the IP address and the
MAC address of the access point.
Click Done.
4.
4-26
describes the symbols in the Group dialog box.
Groups Dialog Box Status Symbols
Description
Access point is not recognized by the AP Manager application.
Access point has been verified by the AP Manager application.
AP Manager attempted to verify the access point, but the attempt failed.
The group is included in the Quick List.
(Figure 4-11); however this time, it
(Figure 4-11).
203939-B