Nortel BayStack 660 Use Manual page 113

Figure 5-9.
Table 5-4
Table 5-4.
Items
Add
Change
Removes
Restrictions
Assign Dynamic IP
Addresses
203939-B
BOOTP Dialog Box
describes the items in the BOOTP dialog box.
BOOTP Dialog Box Items
Description
Adds a BOOTP entry.
Changes a currently listed
"Changing a BOOTP Entry" on page 5-15
changing a BOOTP entry.
Removes a currently listed entry. Go to
Entry" on page 5-16
entry.
Sets restriction for the currently listed entry. Go to
BOOTP Restrictions" on page 5-16
the restrictions of a BOOTP entry.
Assigns an IP address dynamically for the currently listed entry.
Go to "Assigning a Dynamic IP Address" on page 5-18
instructions on assigning a IP address dynamically.
Managing the Access Point
(Figure 5-9) BOOTP entry. Go to
for instructions on
"Removing a BOOTP
for instructions on removing a BOOTP
for instructions on setting
"Setting
for
5-13