Setting The Timeout Interval; Upgrading Firmware - Nortel 120 Using Manual

Setting the timeout interval

You can set the timeout interval for Web access to the unit, after which the
user must reenter the username and password.
Setting the timeout interval
Session Timeout for WEB—Sets the time limit for an idle Web interface
session.
(Range: 0-1800 seconds; Default: 60 seconds; 0 is disabled)

Upgrading Firmware

You can upgrade new access point software from a local file on the
management workstation, or from an FTP or TFTP server. New software
can be provided periodically from your distributor.
After upgrading new software, you must reboot the access point to
implement the new code. Until a reboot occurs, the access point continues
to run the software it used before the upgrade started.
Upgrading Firmware
Copyright © 2006, Nortel Networks
.
BAP120
Using the Nortel Business Access Point 120
NN47921-301 01.01 Standard
1.0 August 2006
WebUI navigation 65
Nortel Networks Confidential