Figure 6-9
Figure 6-9.
PHY Commands
The PHY commands enable you to configure and to display wireless PHY layer
attributes.
The PHY commands are
•
phy add-bss-basic-rate— adds a rate to BSS basic rate set
•
phy channel— sets channel number (DS only)
•
phy delete-bss-basic-rate— deletes a rate from BSS basic rate set
•
phy dwell-time— sets dwell time (FH only)
•
phy hop-sequence— sets hop sequence (FH only)
•
phy show— displays PHY attributes
203939-B
shows an example of the MAC commands.
MAC Commands
Command Line Interface
6-17