Table of Contents
Advertisement
[Final Draft—Nortel Confidential]
22
Chapter 2 System Configuration
Figure 6 SSID screen
Channel
802.11a: – If you select "Enable" the access point will operate in Turbo mode
with a data rate of up to 108 Mbps. By default, the Access Point 2220 operates at
54 Mbps. If you enable Turbo mode, the Access Point 2220 operates up to 108
Mbps. (Turbo mode default: Disable)
Auto Channel Select: Selecting "Enable" allows for automatic radio channel
detection. (Default: "Enable")
802.11b: – Set the operating radio channel number (Default: 11)
214853-A
Note: Available channel settings are limited by local regulations which
determine which channels are available. (Refer to
page
39.)
"Radio Channel" on
Advertisement
Table of Contents
