Adding A Mac Address For The Adapter Card - Nortel BayStack 660 Use Manual

Using the BayStack 660 Wireless LAN Access Point
Table 4-6 describes the items on the Access tab.
Table 4-6.
Item
Get List From
Access Point
Add
Import
Remove
Export
Remove All
Set List Size
Allow only
authorized
stations
Maximum
Concurrent
Users

Adding a MAC Address for the Adapter Card

To add a MAC address for the adapter card list:
In the Adapter tab, click Add.
1.
The Add Station dialog box opens.
Add the MAC address.
2.
4-16
Access Tab Items
Description
Opens the list of authorized stations.
Adds a MAC address to the adapter list. Go to
for the Adapter Card" on page 4-16
address.
Imports a MAC address to the adapter list. Go to
Adapter Card List" on page 4-17
address.
Click to remove a MAC addresses from the list.
Exports a MAC address to the adapter list. Go to
the Adapter Card List" on page 4-18
address.
Click to remove all MAC addresses from the list.
Sets the Get List Size Adds a MAC address to the adapter list. Go to
"Setting the Adapter List Size" on page 4-18
Get List Size.
Allows only authorized or any to have access to the access point.
Type the number of users that the access point should support at any
given instant.
"Adding a MAC Address
for instructions on adding a MAC
"Importing a File to the
for instruction on importing a MAC
"Exporting a File from
for instruction on exporting a MAC
for instruction on setting the
203939-B