Using the BayStack 660 Wireless LAN Access Point
Adding a Group to or Removing a Group from the Quick List
To change the list of groups in the Quick List:
Choose Edit > Groups.
1.
The Groups dialog box
Click Quick List.
2.
The Quick List dialog box opens.
Click the group that you want to add to or remove from the list.
3.
Click the appropriate command (Add, Remove, or Remove All).
4.
Click OK.
5.
Displaying and Configuring Groups in the Quick List
To display and configure groups of access points that are in the quick list:
Choose Configure > Quick List.
1.
Select the group you want to configure.
2.
One of the following dialog boxes opens:
3.
•
•
4-28
(Figure
If the group consists of more than one access point, the Multiple
Configuration Wizard dialog box opens
If the group consists of only one access point, the Access Point dialog box
opens
(Figure
4-6).
4-11) opens.
(Figure
4-15).
203939-B