Figure 3-2. 10Base-T Ethernet Connection - Nortel BayStack 660 Use Manual

Using the BayStack 660 Wireless LAN Access Point
Connect the network and power cables to the access point.
9.
Follow the cable connection instructions for a 10BASE2 Ethernet
10.
connection or a 10BASE-T Ethernet connection.
For a 10BASE-T Ethernet connection, refer to
follow the illustration.
For a 10BASE2 connection, contact Nortel Network technical support.
Figure 3-2.
a.
b.
Plug the AC power adapter into the small round socket on the back of the
11.
access point
3-4
10BASE-T Ethernet Connection
Plug the male RJ-45 connector on the modular data cable into the
female RJ-45 connector on the back of the access point.
Plug the other end of the data cable into a network access port or
directly into a network hub or Ethernet switch port.
(Figure 3-3).
Figure 3-2 and the steps that
8709FB
203939-B