Table of Contents
Advertisement
32
APU Installation & Configuration
Mounting and Installation Concept
Figure 3-1
APU Installation Concept on CATV Network Facility
By default, APU is strand mountable. Each unit is shipped with a strand
clamp module.
Both Drop and Trunk cable termination types are applicable to APU. The
recommended method is Drop cable.
APU supports a variety of antenna types: omni-directional, flat panel and
bi-directional. The antenna type should be selected according to the
coverage needed and type of application - please refer to Appendix H for
more detail information.
WLAN Cable Access Point 6220
NTPM99CA Rel 1.0 Issue 1 Oct. 2004
Advertisement
Table of Contents
