Configuration Commands
The configuration commands enable you to restore factory default configuration
and to save current configuration to flash.
The configuration commands are:
•
config reset—restore factory default configuration
•
config save—save current configuration to flash
Encapsulation Commands
The encapsulation commands enable you to configure and to display
encapsulation attributes.
The encapsulation commands are:
•
encap scheme—select encapsulation scheme
•
encap show—displays authentication attributes
The syntax for the encapsulation commands is:
encap scheme {straight | 802.1h+NTISTT}
encap show
203282-B
Command Line Interface
6-11