Hotline Activation And Deactivation (P30, P29); Virtual Leased Line Activation And Deactivation (P32, P31) - Nortel Meridian SL-100 Reference Manual

7-12 Keypad dialing
3
4
5

Hotline activation and deactivation (P30, P29)

A hotline allows the user to have keyboard dialing initiate calls to an
Autodial number. A Hotline call is placed when the MCA recognizes a
positive transition of DTE or detects a carriage return from the keyboard.
Procedure 7-9 describes the commands required to activate or deactivate a
hotline.
Note: The P in the following procedure represents the Program key.
Procedure 7-9
Activating or deactivating hotline
1
2
3
4
5

Virtual Leased Line activation and deactivation (P32, P31)

Procedure 7-10 describes the commands required to turn a Virtual Leased
Line on or off. Turning on a Virtual Leased Line gives the appearance of a
dedicated line between the terminal and the far-end data device. This
appearance is necessary for applications that require an active data call at all
times.
555-4001-114 Standard 10.02 November 1999
The set exits the programming mode.
Press P27 to instruct the switch to stop sending prompts to the terminal.
Press P to save and exit the command.
Response:
The set exits the programming mode.
You have completed this procedure.
Press P30 to turn the Hotline feature on.
Press P to save and exit the command.
Response:
The set exits the programming mode.
Press P29 to turn the Hotline feature off.
Press P to save and exit the command.
Response:
The set exits the programming mode.
You have completed this procedure.