Using Special Telephones; Direct Dial; Changing The Direct Dial Telephone Assignments; Hotline - Nortel Enterprise Edge 2.0 Manual

Using special telephones

Direct dial

You can reach the direct dial telephone by dialing a single digit. The direct dial
telephone is normally in a central location, such as an attendant's desk. You can
have up to five direct dial telephones for your Enterprise Edge system. The direct
dial telephone is normally the prime telephone or the central answering position
(CAP).
The direct dial telephone can send up to 30 messages and can activate Services to
activate the extra dial telephone.

Changing the direct dial telephone assignments

Your installer sets up the direct dial telephone.
You can change which telephone is the direct dial telephone and assign if necessary
which is the direct dial telephone. You need to start a Unified Manager session to
program this feature. For more information about programming using the Unified
Manager, see the Enterprise Edge 2.0 Programming Operations Guide.
You can assign any number of telephones to call the direct dial telephone.

Hotline

A hotline telephone calls a set internal or external telephone number when you pick
up the receiver (or press

Bypassing a Hotline

Press a line button, or use the Pre-Dial or Automatic Dial feature before you pick
up the receiver or press
Card or see Changing how you dial your calls
P0911589 Issue 03
©
).
Tip
Label the telephone to warn anyone using a hotline telephone that it is active.
©
on a hotline telephone. See the Telephone Feature
Enterprise Edge 2.0 Feature Programming Telephone Guide
Using System features 93
on page 34.