Modify; Autodial Number - Nortel Meridian SL-100 Reference Manual

3
4

Modify

The Modify feature allows the user to manipulate the following items:

Autodial number

Procedure 8-7 describes how to modify an autodial number.
Procedure 8-7
Modifying an autodial number
1
2
3
Meridian SuperNode MSL-100 Meridian Modular Telephones Reference Manual MSL11
The MCA uses the Ring Again feature, or the MCA cancels the previous Ring
Again.
When the called number becomes free, the MCA sends a BELL character to
the terminal. The screen displays the following prompt:
DATA STATION NOW AVAILABLE.
Type Y (CR) or (CR).
Response:
The switch places the called number. The screen displays the following
prompt:
CALLING nnnn
You have completed this procedure.
change stored Autodial numbers
change any of the stored Speed Call numbers
set the MCA into the Remote Loopback mode
select manual or auto answer
modify Script files
Press return (CR).
Response:
The following prompt appears on the screen.
ENTER NUMBER OR H (FOR HELP):
Note: The only valid characters are those on the screen. Illegal characters
result in the following prompt:
INVALID COMMAND / ENTRY,
REENTER:
Type H (CR).
Response:
Terminal displays the Main menu.
Type M (CR).
Nortel keyboard dialing 8-15
PLACE CALL? (Y/N)