Terminal Parameters - Nortel Meridian SL-100 Reference Manual

8-6 Nortel keyboard dialing

Terminal parameters

Terminal parameters, such as baud rate, can be printed on the user's
terminal. Procedure 8-1 describes the steps necessary to display the user's
terminal parameters.
Note:
Procedure 8-1
Displaying terminal parameters
1
2
3
Note: The P in this procedure represents the Program key.
555-4001-114 Standard 10.02 November 1999
indicates a carriage return.
(CR)
Press carriage return.
Response:
The following prompt appears on the screen.
ENTER NUMBER OR H (FOR HELP):
Note: The only valid characters are those on the screen. Illegal characters
result in the following prompt:
INVALID COMMAND / ENTRY,
REENTER:
Type H (CR).
Response:
Terminal displays the Main Menu.
Type P (CR).
Response:
The screen display information shows the items listed with possible values for
each as shown in the following example:
Engineering code = NT2K0009
Release = 01
Firmware = 3.5
Baud Rate = 19200
Parity = ODD
DTR = ON
DCD = ON
VLL = OFF
Hotline = OFF
Remote Loopback = OFF
Manual Answer = OFF
Data directory number = 4000
Auto Dial No. = 3600
DCD = Data Carrier Detect
DTR = Data Terminal Ready
VLL = Virtual Leased Line