8-30 Nortel keyboard dialing
Auto answer
This procedure is used when the user's answer mode is set for Automatic
Answer and an incoming data call occurs. If the user changes the speed of
the terminal without re-autobauding, the data displayed on the screen at Step
1 is meaningless. If the Digit Display feature is not assigned to the MCA,
the calling number is not displayed at Step 1. Procedure 8-15 describes how
to establish Auto answer.
Procedure 8-15
Establishing auto answer
1
2
3
555-4001-114 Standard 10.02 November 1999
Type nnnn (CR) (CR).
Response:
The terminal displays the following prompt:
INCOMING CALL CONNECTED
Both terminals are compatible. The data call is established.
or
Type nnnn (CR).
Response:
The terminal displays the following prompt:
UNDER TEST
The calling party requests the MCA to loopback data.
Press return twice.
Response:
The terminal displays the following prompt:
INCOMPATIBLE INCOMING CALL
RELEASED
Incoming data call connection failed because of mismatch in baud rate or
unsupported data pattern. Data call is not established.
You have completed this procedure.