Nortel Meridian SL-100 Reference Manual page 285

Table 13-1xxx
Standard Hayes keyboard dialing commands
Command
&D3
&Q0*
&Q5
&R0
&R1
&S0
&S1
Z0
Z1
Meridian SuperNode MSL-100 Meridian Modular Telephones Reference Manual MSL11
Description
Hang up and reset to default settings (for example, MCA
profile configuration).
Disable baud rate ADAPTING. MCA attempts to connect
at the speed of last autobaud command. This command is
the default if ADAPTING is disabled in the MCA profile.
This command is displayed by SMARTCOM III if the
V-SERIES ERROR CONTROL option is set to N.
Note: The V-SERIES ERROR CONTROL option can be
reached using the CONNECT SETTINGS menu of
SMARTCOM III.
Enable baud rate ADAPTING. MCA attempts connection
at baud rate of far end. This command is the default if
ADAPTING is disabled in the MCA profile. This command
is displayed by SMARTCOM III if the V-SERIES ERROR
CONTROL option is set to Y or H.
Note: The V-SERIES ERROR CONTROL option can be
reached through the CONNECT SETTINGS menu of
SMARTCOM III.
CTS and DSR tracks far-end DTR or CD. (Near-end RTS
maps to far-end CD, which maps back to near-end CTS.)
This command is the default if ASERTCD DPOPT is not
datafilled for the MCA.
Assume CTS and DSR always present. This command
asserts the EIA control leads CTS and DSR. This
command is the default if ASERTRTS DPOPT is datafilled
for the MCA.
Assume CTS and DSR always present. This command
asserts the EIA control leads CTS and DSR. This
command is the default if ASERTRTS DPOPT is datafilled
for the MCA.
CTS and DSR tracks far-end DTR or CD. (Near-end RTS
maps to far-end CD, which maps back to near-end CTS.)
This command is the default if ASERTCD DPOPT is not
datafilled for the MCA.
Reset MCA to default settings.
Reset MCA to default settings.
—continued—
Hayes standard AT commands 13-3
(continued)