Nortel Meridian SL-100 Reference Manual page 69

Table 2-4xxx
Miscellaneous troubleshooting tips
Symptom
Garbled prompts are sent to your
terminal when you press carriage
return.
The CALLING prompt is displayed
when you try to make a data call from
the initial prompt or Main Menu in
keyboard dialing (KBD).
Note 1: If you are using an RS-232 cable to connect the MCA to an ADM3/5
terminal, be sure pin 22 is disconnected.
Note 2: Some terminals may drop DTR with the break. If this happens, the
Release message does not display.
Meridian SuperNode MSL-100 Meridian Modular Telephones Reference Manual MSL11
Installation procedures 2-45
(continued)
Solution
Enter a period (.) followed by carriage
return to perform an autoparity.
Hold down the break key(s) for two
seconds and press carriage return.
Try to make the data call again. If the
problems persists, the MCA is
probably disabled. Call your
telephone system administrator.
—end—