Suzuki Grand Vitara 2011 Manual page 112

1A-43 Engine General Information and Diagnosis: For Petrol Engine Model
Scan tool data
ELECTRIC LOAD
PSP SWITCH (POWER
STEERING PUMP
PRESSURE SWITCH)
RADIATOR FAN LOW
(RADIATOR COOLING FAN
CONTROL RELAY No.1)
RADIATOR FAN NO.1
HIGH (RADIATOR COOLING
FAN CONTROL RELAY
NO.2)
RADIATOR FAN NO.2
HIGH (RADIATOR COOLING
FAN CONTROL RELAY
NO.3)
TP SENSOR 1 VOLT
(THROTTLE POSITION
SENSOR (MAIN) OUTPUT
VOLTAGE)
TP SENSOR 2 VOLT
(THROTTLE POSITION
SENSOR (SUB) OUTPUT
VOLTAGE)
APP SENSOR 1 VOLT
(ACCELERATOR PEDAL
POSITION (APP) SENSOR
(MAIN) OUTPUT VOLTAGE)
APP SENSOR 2 VOLT
(ACCELERATOR PEDAL
POSITION (APP) SENSOR
(SUB) OUTPUT VOLTAGE)
ACCEL POSITION
(ABSOLUTE
ACCELERATOR PEDAL
POSITION)
TARGET THROTTLE
POSI (TARGET THROTTLE
VALVE POSITION)
IAC THROTTLE
OPENING (IDLE AIR
CONTROL THROTTLE
VALVE OPENING)
THROTTLE MOTOR
VOLT
CLOSED THROTTLE
POS (CLOSED THROTTLE
POSITION)
THROTTLE MOTOR
RELAY
* VEHICLE SPEED
INJ PULSE WIDTH (FUEL
INJECTION PULSE WIDTH)
Vehicle condition
Ignition switch ON / Headlight, small light, all turned
OFF
Ignition switch ON / Headlight, small light, turned
ON
At specified idle speed and steering wheel at
straight ahead position
At specified idle speed and steering wheel turned to
the right or left as far as it stops
Engine coolant temp.: Lower
than 95 °C (203 °F)
Ignition switch ON
Engine coolant temp.: 97.5
°C (208 °F) or higher
Engine coolant temp.: lower
than 100 °C (212 °F)
Ignition switch ON
Engine coolant temp.: 102.5
°C (212 °F) or higher
Engine coolant temp.: lower
than 100 °C (212 °F)
Ignition switch ON
Engine coolant temp.: 102.5
°C (212 °F) or higher
Accelerator pedal released
Ignition switch ON
after warmed up Accelerator pedal depressed
engine fully
Accelerator pedal released
Ignition switch ON
after warmed up Accelerator pedal depressed
engine fully
Accelerator pedal released
Ignition switch ON
after warmed up Accelerator pedal depressed
engine fully
Accelerator pedal released
Ignition switch ON
after warmed up Accelerator pedal depressed
engine fully
Accelerator pedal released
Ignition switch ON
after warmed up Accelerator pedal depressed
engine fully
Ignition switch ON Accelerator pedal released
after warmed up Accelerator pedal depressed
engine fully
It idling with no load after warming up
Ignition switch ON / engine at stop
Throttle valve at idle position
Throttle valve opens larger than idle position
At specified idle speed after warming up
At stop
At specified idle speed with no load after warming
up
At 2500 r/min. with no load after warming up
Normal condition /
reference values
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
0.7 – 1.2 V
3.6 – 4.3 V
1.6 – 2.0 V
3.8 – 4.5 V
0.7 – 0.8 V
3.5 – 4.3 V
0.3 – 0.4 V
1.7 – 2.2 V
0 – 5%
90 – 100%
0 – 5%
90 – 100%
5 – 55%
10.0 – 14.0 V
ON
OFF
ON
0 km/h (0 mph)
2.0 – 4.0 msec.
2.0 – 3.6 msec.