Dome Foil; Dome Foil Removal - Sony Ericsson Z525i Working Instruction

4.28 Dome Foil

4.28.1

Dome Foil Removal

•
Perform all sections of the Base Disassembly Procedure
Tools needed to perform the following steps:
*
*
NOTE!
NOTE!
1. Carefully peel off the dome foil.
NOTE!
2. Clean off any adhesive residue remaining on the
board using isopropyl alcohol and a lint-free wipe.
3/00021-1/FEA 209 544/597 F
©
Sony Ericsson Mobile Communications AB
Style 2A ESD tweezers (Blunt Tip)
Pry tool
A " * " beside a tool listed above indicates that the tool is not specifically called out in the
following instructions, but an operator may find it helpful to use that tool when performing some
steps of the following procedure.
The phrase "pry tool" indicates that a nylon pointer, an orangewood stick, or a front opening tool
may be used during this procedure depending on the user's preference.
Be careful not to damage the circuit board.
Step-by-Step Instructions
Working Instruction, Mechanical
•
Lint-free wipes
78(115)