16. Orient the magnet so that the side of the magnet with
the adhesive film is oriented towards the screw boss
and insert the magnet into its slot.
17. Using tweezers, press the magnet down into its slot
and inward towards screw boss so that the magnet
forms a good bond to the inner flip cover.
•
Perform the Main Flex Film Reassembly Procedure.
•
Perform the Hinge Reassembly Procedure
•
Perform sections 3.2.2 - 3.2.3 of the Flip Reassembly Procedure.
•
Perform the Antenna Cover Installation Procedure.
•
Perform sections 2.2.2 - 2.2.5 of the Base Reassembly Procedure.
•
For non-DPY/Z units, perform the Co-Brand Label Installation Procedure.
3/00021-1/FEA 209 544/597 F
©
Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
Working Instruction, Mechanical
113(115)