Sony Ericsson Z525i Working Instruction page 20

4. Slide the pry tool along the seam just before reaching
the location where the style-up cover is being pressed
and rotate the nylon pointer towards the base so that
the latch holding the style up cover disengages. Stop
pressing once the latch disengages.
5. Locate the other notch found along the seam where
the style-up cover and the outer flip cover come
together and repeat the previous three steps to release
that side of the style-up cover from the phone.
6. Once the two side latches are free, pry the hinge end
of the style-up cover loose from the press-fit sockets
that are holding it.
7. Remove the style-up cover by rotating it away from
the hinge joint while simultaneously lifting the cover
from the phone.
3/00021-1/FEA 209 544/597 F
©
Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
Working Instruction, Mechanical
20(115)