Table of Contents
Advertisement
Replacement Instruction continued
3.6 System connector
Follow the 2.1.1 – 2.1.4 Disassembly instructions!
1. Use your fingers to remove the system connector.
2. Use your fingers to mount the system connector.
Follow the 4.1.1 – 4.1.4 Reassembly instructions!
3.7 Dome Foil
Follow the 2.1.1 – 2.1.4 Disassembly instructions!
DO NOT TOUCH THE KEYPAD DOME FOIL OR PCB
ALWAYS USE A PAIR OF TWEEZERS
Remove the old Dome Foil with a pair of tweezers.
I
'
T
S IMPORTANT TO ALLIGN THE
.
PROPERLY
Apply the new Dome Foil on the PBA using a pair of
tweezers. Guide the Dome Foil according to the guide hole
(1A) and guide line (2A-2B) on the PCB as shown in the
picture.
Follow the 4.1.1 – 4.1.4 Reassembly instructions!
3/000 21-1/FEA 209 544/127 A
©
Company Internal
Sony Ericsson Mobile Communications AB
.
.
K
EYPAD DOME FOIL
Working Instruction, Mechanical
12(30)
Advertisement
Table of Contents
