Lcd Assembly; Lcd Assembly Removal - Sony Ericsson Z525i Working Instruction

4. Insert the magnet into its slot and press it downward
and inward so that the magnet forms a good bond to
the inner flip cover.
•
Perform sections 3.2.2 - 3.2.3 the Flip Reassembly procedure.

4.20 LCD Assembly

4.20.1

LCD Assembly Removal

•
Perform all sections of the Flip Disassembly
Tools needed to perform the following steps:
NOTE!
1. Locate the camera module's connection to the main
flex film.
2. Disconnect the camera module's flex film from its
mating connector on the main flex film by rotating
the black retaining bar of the connector towards the
camera module's flex film into a vertical position
using a pry tool.
3/00021-1/FEA 209 544/597 F
©
Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
Whenever the phrase "pry tool" is used, a nylon pointer, an orangewood stick, or a front opening
tool may be used, depending on the user's preference.
Step-by-Step Instructions
Working Instruction, Mechanical
•
Pry Tool
61(115)