Sony Ericsson Z525i Working Instruction page 28

7. Remove the protective covering from the camera
ring adhesive.
8. Orient the camera ring that is being installed so that
its side with the camera gasket is oriented away
from the inner surface of the outer flip cover.
NOTE!
9. Align the notch features in the edge of the camera
ring's outer lip with their corresponding features in
the outer flip cover.
10. Insert the camera ring into its hole and press it
against the outer flip cover so that a good adhesive
bond forms between the two parts.
3/00021-1/FEA 209 544/597 F
©
Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
Avoid contaminating the portion of the
camera ring adhesive that remains exposed
once the camera ring is installed.
Working Instruction, Mechanical
28(115)