d. Remove the protective covering from the
e. Realign the flex film extension containing the
f.
g. Install the wedge shaped piece of protective tape
3/00021-1/FEA 209 544/597 F
©
Sony Ericsson Mobile Communications AB
adhesive film located on the back of the flex film
extension containing the vibrator contact pads.
vibrator contact pads with the corresponding
features of the main flex film and apply pressure
to the area where the adhesive is located so that a
good bond forms between the extension and the
main flex film.
Install a spacer pad in the location shown.
(SXA 109 6005) in the location shown.
Step-by-Step Instructions
Working Instruction, Mechanical
104(115)