Sony Ericsson Z525i Working Instruction page 26

7. Place the LCD sub-frame onto the inner flip cover so
that the features in the LCD sub-frame align to the
screw bosses on the inner flip cover.
8. Rotate the hinge arms down on top of the inner flip
cover/LCD sub-frame assembly.
9. Verify that the magnet is correctly mounted in its
slot in the inner flip cover.
The sections of the flip reassembly following this section must be performed in sequential order to
reassemble the base portion of the phone.
3/00021-1/FEA 209 544/597 F
©
Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
Working Instruction, Mechanical
26(115)