Flip Assembly Installation - Sony Ericsson Z525i Working Instruction

2.2.2

Flip Assembly Installation

Tools needed to perform the following steps:
1. Orient the flip assembly so that the large display is
facing downward.
2. Orient the circuit board/inner base cover assembly to
the flip assembly so that their hinge ends are towards
one another as shown.
3. Press the edge of the antenna cover that is furthest
from the hinge down towards the flip. This action
moves the two tab features on the antenna cover
against the two joints of the hinge, making it easier
to correctly assemble the two halves of the phone.
4. Locate the tab that is against each of the two joints
of the hinge assembly.
5. While continuing to lightly press the antenna cover
towards the flip, insert the antenna cover's two tabs
behind their mating edges of the hinge covering
portion of the inner base cover.
3/00021-1/FEA 209 544/597 F
©
Sony Ericsson Mobile Communications AB
None
Step-by-Step Instructions
Working Instruction, Mechanical
12(115)