Sony Ericsson Z525i Working Instruction page 106

k. Lightly bend the flex film near the vibrator
l.
NOTE!
2. Orient the main flex film so that the extension that
connects to the circuit board is to the top and the
circuit board connection on the flex film is facing
away from you.
3/00021-1/FEA 209 544/597 F
©
Sony Ericsson Mobile Communications AB
connection area as shown.
Remove the protective covering from the
adhesive film located on the main flex film that is
directly behind vibrator contacts.
Avoid contaminating the adhesive on the
flex film directly opposite of the extension
that contains the vibrator contact pads.
Step-by-Step Instructions
Working Instruction, Mechanical
106(115)