18. Open the phone so that the keypad is accessible.
NOTE!
19. Install new screw covers over the inner flip cover's
two screw locations near the hinge.
20. Using your thumb, apply pressure to each of the
screw covers so that a good bond forms between the
screw cover and the top of the screw.
3/00021-1/FEA 209 544/597 F
©
Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
The screw covers have a specific
orientation. The notch in the screw cover
should be aligned to the standoff in the
screw's recess hole.
Working Instruction, Mechanical
30(115)