Camera Ring - Sony Ericsson Z525i Working Instruction

13. Place the vibrator in its cavity in the new outer flip
cover so that the contacts are oriented away from the
outer flip cover and the neck on the vibrator is
aligned with the notch in the wall of the vibrator
cavity.
14. Press on the vibrator to make sure it is seated all the
way down in its cavity.
•
To install this part, perform sections 3.2.2 - 3.2.3 of the flip reassembly.

4.11 Camera Ring

The removal and installation of this part is covered in the flip disassembly and reassembly
procedures. To replace the camera ring, perform sections 3.1.1 – 3.1.2 of the flip disassembly and
sections 3.2.2 - 3.2.3 of the flip reassembly. Use a new camera ring when instructed to install the
camera ring.
3/00021-1/FEA 209 544/597 F
©
Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
Working Instruction, Mechanical
46(115)