Table of Contents
Advertisement
3.2 Dome Foil
Process tools
•
Instruction
•
#
1
2
3
3/00021-1/FEA 209 544/81 E
Sony Ericsson Mobile Communications AB
Pair of Tweezers.
Disassemble the phone as described in 1 Disassembly (page 2-5), follow steps 1-13.
Figure
Fig 3.2.1
Fig 3.2.2
Fig 3.2.3
Working Instructions, SP/Mechanical
Instruction
Remove the Conductive
Sponge with a pair of
tweezers. (Fig 3.2.1)
Remove the old Dome
foil, with a pair of
tweezers. (Fig 3.2.2)
Replace the new Dome
foil on the PCB. Aim
the dome foil according
to the guide holes on the
PCB as shown in the
picture. (Fig 3.2.3)
Note
Do not touch the
dome and PCB.
Do not touch the
dome foil or PCB.
Clean the PCB
surface from glue
and dust.
Always use a pair of
tweezers.
22(43)
Advertisement
Table of Contents
